+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Metering actuator question... (/showthread.php?tid=5187)
Pages: 1 2
Metering actuator question... - Waterloo - 10-17-2019
Putting the truck together, and noticed the metering actuator window, that little plastic bubble is cracked and it looked like a bit of fuel had dripped out of it. Is this something that I have to replace or what? I searched all over quick serve, nothing about this window/bubble being damaged. Advice please.
RE: Metering actuator question... - tree98 - 10-17-2019
You got a pic Waterloo? I don't have an answer but I'm also not sure what your referring to.
RE: Metering actuator question... - Lonestar10 - 10-17-2019
It's the clear price on actuators facing you when hoods open bout a half in round clear price that tends to look like it has an air bubble in it.
RE: Metering actuator question... - tree98 - 10-17-2019
This on an 870 or just 871 ?
RE: Metering actuator question... - Lonestar10 - 10-17-2019
870 871 both use same actuators but loo has 871
RE: Metering actuator question... - Waterloo - 10-17-2019
Yep, that wax cover, one has a tiny nick in it, just wondering if this is anything to be concerned with.
RE: Metering actuator question... - hhow55 - 10-17-2019
I tend to believe eventually, it would begin to suck air into fuel system.
RE: Metering actuator question... - Waterloo - 10-17-2019
If this is a possible issue down the line, the knick is very small, anything to patch it with? Maybe liquid electrical tape? Or something like a gel superglue? Gorilla tape? LOL
RE: Metering actuator question... - Rawze - 10-17-2019
unless it is leaking fuel, I would not worry about it. Maybe put a touch of silicone in it to keep dirt out of it. It is just a dust cover for the coil, does not seal anything normally.