+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Engine brake settings question (/showthread.php?tid=6424)
Engine brake settings question - Lonestar10 - 07-20-2020
So have a new turbo yts stage 2 he400vg on the cm2350 got my turbo tables adjusted back for 32psi as it was making 35-36. But engine brake I'm not really sure what to change because if I'm up above 1500rpm it will spike the boost to 38ish psi then immediately drop to around 30-32 psi.
What do I need to change so it's not so aggressive right out the gate so it stops spiking?
RE: Engine brake settings question - Rawze - 07-21-2020
(07-20-2020 )Lonestar10 Wrote: So have a new turbo yts stage 2 he400vg on the cm2350 got my turbo tables adjusted back for 32psi as it was making 35-36. But engine brake I'm not really sure what to change because if I'm up above 1500rpm it will spike the boost to 38ish psi then immediately drop to around 30-32 psi.
What do I need to change so it's not so aggressive right out the gate so it stops spiking?
having to compensate for 4 psi is a fairly significant change...
The engine brake position limiting (min/max) tables could be lowered a bit so that it does not spike as high.