+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: SAS fault (/showthread.php?tid=6708)
SAS fault - kellyedrew - 10-18-2020
I have a 2012 Pete 587 and I purchased an aftermarket steering wheel and hub kit as my factory steering wheel covering was completely falling apart. I replaced the steering wheel and now have a SAS (steering angle sensor) fault. Is there a process to reset this or will I have to find someone with a computer and software?
RE: SAS fault - snailexpress - 10-19-2020
(10-18-2020 )kellyedrew Wrote: I have a 2012 Pete 587 and I purchased an aftermarket steering wheel and hub kit as my factory steering wheel covering was completely falling apart. I replaced the steering wheel and now have a SAS (steering angle sensor) fault. Is there a process to reset this or will I have to find someone with a computer and software?Need computer and software to recalibrate sensor. If truck with Bendix ABS/TCS you can use ACom diagnostic from Bendix and Inline adapter.