Rawze.com: Rawze's ISX Technical Discussion and more
turbo leaking oil - Printable Version

+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: turbo leaking oil (/showthread.php?tid=68)

Pages: 1 2 3 4 5


turbo leaking oil - slowpoke - 02-26-2016

pulled my turbo off cm 871 had oil in tube to air charge cooler once removed found oil also in exhaust pipe but no oil in exhaust manifold. I figured seals gone, turbo shop says turbo cant leak both sides, i must have bad head or something. anybody ever seen them leak both sides?


RE: turbo leaking oil - Unilevers - 02-26-2016

it can certainly leak both side's. find a new turbo shop.


RE: turbo leaking oil - slowpoke - 02-26-2016

thanks, well its under warranty and their going to replace seals in it but i have a feeling hes going to wash it down and reassemble.
i cant think off any way to check if he does or not


RE: turbo leaking oil - Nilao - 02-26-2016

My 1st and only turbo failure had oil shooting out both ends.


RE: turbo leaking oil - in2trux - 02-26-2016

(02-26-2016 )slowpoke Wrote:  thanks, well its under warranty and their going to replace seals in it but i have a feeling hes going to wash it down and reassemble.
i cant think off any way to check if he does or not

mark it with a scribe or scratches, paint pen that would show if disassembled.
Like Uni said, find a new turbo shop.


RE: turbo leaking oil - Unilevers - 02-26-2016

90% of the non cummins remans out there for vgt's are junk. honestly the only reliable one ive seen so far has been dr. ISX's guy - most last only days


RE: turbo leaking oil - slowpoke - 02-26-2016

he did split it open in-front of me but not the turbines core section where seals are. i'm picking it back up tomorrow at noon if i invert turbo pore oil in drain port and let sit would oil seep past seal normally? only thing i can think of


RE: turbo leaking oil - in2trux - 02-26-2016

It would probably need pressure and heat.


RE: turbo leaking oil - slowpoke - 02-26-2016

okay i wont bother then thanks