+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Isx cm871 front gear housing dowty washers (/showthread.php?tid=9481)
Isx cm871 front gear housing dowty washers - Mrt800 - 03-12-2024
Front Gear housing captive bolts sealing washers
Hello Rawze nation , I have a question about the dowty
Sealing washers on the front gear housing. Are the sealing
Washers on the bolts reusable?.
Thank you in advance.
RE: Isx cm871 front gear housing dowty washers - Rawze - 03-12-2024
Might be best to replace them if you don't plan on taking it apart for the next million miles.
Whenever I do re-use one though, I spray a wax coating on hem to help their longevity...
ref: https://amzn.to/3Vgt9KO
RE: Isx cm871 front gear housing dowty washers - Mrt800 - 03-12-2024
(03-12-2024 )Rawze Wrote: Might be best to replace them if you don't plan on taking it apart for the next million miles.
Whenever I do re-use one though, I spray a wax coating on hem to help their longevity...
ref: https://amzn.to/3Vgt9KO
They are m10 bolts would it a be problem to use 3/8 seal washers ?
Cummins don’t offer the washers they only offer the bolts with the
Washers as a unit at $10 a screw . I’m thinking after market
Sealing washers. Can’t seem to find m10 dowty washers.