+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Isx leak (/showthread.php?tid=9648)
Pages: 1 2
Isx leak - 3406E - 07-20-2024
Got a cm870 04 built date. 860k miles. Leaking oil from bottom front section of engine. Don’t know if it’s crank seal or the front structure gasket. Leaking badly. Any suggestions? Picture down below is what it leaves at every stop I make sometimes worse. Thanks
RE: Isx leak - Rawze - 07-21-2024
Could be anyone's guess. ... wipe everything down and find exactly where its coming from.
RE: Isx leak - 3406E - 09-01-2024
Cleaned everything and change the crank seal, still leaking loosing a gallon a week messing up all over under the truck. Anyone knows quote or estimate to get front gear seal replaced?
RE: Isx leak - 3406E - 09-01-2024
I would like to get it done at the Cummins shop in griffin that’s everyone recommendeds
RE: Isx leak - Rawze - 09-02-2024
(09-01-2024 )3406E Wrote: I would like to get it done at the Cummins shop in griffin that’s everyone recommendeds
SO far, you have not shown a single pic of where the leak is originating from .. nor any detail .. so its anyone's guess.
that place you mentioned would be ...
Mr. Hag's shop - 'Haggai automotive' in griffin, GA.
RE: Isx leak - 3406E - 09-02-2024
Will send better pictures when I go back underneath but it’s mostly leaking at the two front sides
RE: Isx leak - 3406E - 09-02-2024
think the oil pan is leaking too, whoever did it put permatex on both sides of the gasket in the corners.all 4 corners is done like that
RE: Isx leak - 3406E - 09-02-2024
Also found out awhile ago that it’s a after market oil pan made by some company called spectra premium on it, was always wondering why is my oil pan black
RE: Isx leak - 3406E - 09-02-2024
Can also see it dripping from bolts