+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: ISX15 CM2250SN Aftertreatment () (/showthread.php?tid=9912)
ISX15 CM2250SN Aftertreatment () - SimonKW20 - 01-19-2025
Hi all
I am from Australia and having issues with one of my trucks. It's a 2020 model ISX15 CM2250SN. I have an electrical short internal to my dosing pump and therefore requires replacement. These pumps run over $5000 here in Aus. I know of a few guys around that can turn off the aftertreatment system but after some looking around rawze's forums I realise this needs to be done correctly in order to prevent any engine damage later on. I have Cummins Insite myself and was wondering if anyone could assist me with rewriting my program. As far as I understand you need Calterm for this. Any assistance greatly appreciated. Thankyou
RE: ISX15 CM2250SN Aftertreatment () - Rawze - 01-19-2025
Copy program from ecm and e-mail it to me for a review.. and possible solutions.
ref: http://rawze.com/forums/showthread.php?tid=8425&pid=72945#pid72945
RE: ISX15 CM2250SN Aftertreatment () - SimonKW20 - 01-20-2025
(01-19-2025 )Rawze Wrote: Copy program from ecm and e-mail it to me for a review.. and possible solutions.
ref: http://rawze.com/forums/showthread.php?tid=8425&pid=72945#pid72945
Hi mate just to be clear. Do you want the Insite ECM download emailed to you or do I need to get Calterm in order to download the parameters
RE: ISX15 CM2250SN Aftertreatment () - tree98 - 01-20-2025
You'll need c a l t e r m
RE: ISX15 CM2250SN Aftertreatment () - SimonKW20 - 01-20-2025
(01-20-2025 )tree98 Wrote: You'll need c a l t e r mHey mate any chance you could assist me with finding where to download calterm ?
Having trouble finding it anywhere thanks