ISX15 CM2250SN Aftertreatment ()

[SimonKW20]

Hi all
I am from Australia and having issues with one of my trucks. It's a 2020 model ISX15 CM2250SN. I have an electrical short internal to my dosing pump and therefore requires replacement. These pumps run over $5000 here in Aus. I know of a few guys around that can turn off the aftertreatment system but after some looking around rawze's forums I realise this needs to be done correctly in order to prevent any engine damage later on. I have Cummins Insite myself and was wondering if anyone could assist me with rewriting my program. As far as I understand you need Calterm for this. Any assistance greatly appreciated. Thankyou

[Rawze]

Copy program from ecm and e-mail it to me for a review.. and possible solutions.

ref: http://rawze.com/forums/showthread.php?t...5#pid72945

[SimonKW20]

(01-19-2025 )Rawze Wrote:  Copy program from ecm and e-mail it to me for a review.. and possible solutions.

ref: http://rawze.com/forums/showthread.php?t...5#pid72945

Hi mate just to be clear. Do you want the Insite ECM download emailed to you or do I need to get Calterm in order to download the parameters

[tree98]

You'll need c a l t e r m

[SimonKW20]

(01-20-2025 )tree98 Wrote:  You'll need c a l t e r m

Hey mate any chance you could assist me with finding where to download calterm ?
Having trouble finding it anywhere thanks