N14 Injector Solenoid Failure
Today, (Subject: N14 Injector Solenoid Failure ) 
Post: #1
N14 Injector Solenoid Failure
Has anyone else come across this issue on a N14 Celect Plus? What's happening is that it keeps breaking the internal plunger on the solenoids and will cause an over fueling condition. It is always #4 injector. I've attached some pictures so you guys can see what I'm talking about.


   
   

I've checked cam, cam followers, push tubes, rocker arms and shaft, ohmed out harness and load tested it, pass-through as well, and ecm. Any suggestions guys?
replyreply
Today, (Subject: N14 Injector Solenoid Failure ) 
Post: #2
RE: N14 Injector Solenoid Failure
N14 should be in a museum by now... I hope like h#ell your not trying to haul freight with an old N14... you need to get rid of it and buy something 25+ years newer at this point.

DO NOT EXPECT any injectors or other parts to be worth 3 cents on those old antique engines these days.. You could buy 5000 injectors and maybe get 3 that last for more than 1-2 years.. that is how old and out of date and how little there is for reman for them any more... they are a dinosaur of the past.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: mikkhh
Today, (Subject: N14 Injector Solenoid Failure ) 
Post: #3
RE: N14 Injector Solenoid Failure
It is a customer's truck. I don't drive them. I just fix them.
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.