Need info please

[Rawze]

(09-19-2017 )RollinCoal Wrote:  Sorry to hear about your home bud,
Did they try to bake it?
Usally when there baked they will clean up
For as the "mandate" removal no you would not need them
Ive heard of people punching 4-5 inch hole threw them
to keep the appearance and allow the engine to breath
Where are you located?
Or if you could get to my town Ill help you anyway I can.. free of charge

For those who live in countries that allow such things, 4-5" hole is not nearly big enough. You still get too much heat absorption, lowered exhaust efficiency. Not good for the engine, turbo or wallet long term. 8" minimum is my experience with them,.. leave nothing that can disperse and absorb heat. Otherwise some will have to be going back and re-doing it again later.

[Magard]

Completely remove material inside. The cans are double walled. You won't notice a noise change either. Heat feels the same also. Completely open do it once and be done.

[Waterloo]

Double Ditto what Magard said. Hollow them right out and be done with it. Mine sounds fine, no noticeable increase in sound, and I have a weed burner.

[smorgan87]

Id definitely go visit with mr hagg