| Locked out |
| 05-12-2016, (Subject: Locked out ) Post: #1 | |||
| |||
| Locked out Hello guys Was getting ready to do an injector test on a truck computer was taking it's time si I walked away for a minute and I was locked out locked to read only mode...has anyone had this problem? Thanks | |||
| 05-12-2016, (Subject: Locked out ) Post: #2 | |||
| |||
| RE: Locked out if you were using insite and connected under "Master" privileges and lost communication with the ECU then the program will try to re-establish the connection but may have done so under "read only" privileges, it will usually ask your permission to re-connect. User's Signature: In the immortal words of Romeo as he gazed upon Juliet's eyes..."Wait...We Drank What?!" | |||
| 05-13-2016, (Subject: Locked out ) Post: #3 | |||
| |||
| RE: Locked out Is the ECM password protected? | |||
| 05-13-2016, (Subject: Locked out ) Post: #4 | |||
| |||
| RE: Locked out Not sure I don't think it is cuz I've plugged into it b 4 & it's locked w/o being hooked up to anything, one of the fine gentlemen is gonna fix me up I figured I'd throw it on here to get feedback.. Thanks | |||
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.