INJECTOR TROUBLES |
01-27-2023, (Subject: INJECTOR TROUBLES ) Post: #1 | |||
| |||
INJECTOR TROUBLES CM870 #INJECTOR BLEW INTO 8 PIECES WHILE RUNNING, ANYONE SEEN THIS | |||
01-27-2023, (Subject: INJECTOR TROUBLES ) Post: #2 | |||
| |||
RE: INJECTOR TROUBLES not without some kind of abuse or a garbage-can (bad) delete file. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
01-30-2023, (Subject: INJECTOR TROUBLES ) Post: #3 | |||
| |||
RE: INJECTOR TROUBLES Thanks Rawze, the truck has been deleted and went over 10,000 miles before failure. | |||
01-30-2023, (Subject: INJECTOR TROUBLES ) Post: #4 | |||
| |||
RE: INJECTOR TROUBLES (01-30-2023 )muttonman Wrote: Thanks Rawze, the truck has been deleted and went over 10,000 miles before failure. Sounds like the same garbage tune my buddy has in his truck, I will be surprised it it does not throw a rod through the block in the next few weeks. User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields. | |||
|
01-30-2023, (Subject: INJECTOR TROUBLES ) Post: #5 | |||
| |||
RE: INJECTOR TROUBLES | |||
|
01-31-2023, (Subject: INJECTOR TROUBLES ) Post: #6 | |||
| |||
RE: INJECTOR TROUBLES Truck was tuned when new owner got it, has blown 2 head gaskets. Only thing we could find, head bolts were reused and not replaced both times. They were strechted not giving proper torque. | |||
01-31-2023, (Subject: INJECTOR TROUBLES ) Post: #7 | |||
| |||
RE: INJECTOR TROUBLES (01-31-2023 )muttonman Wrote: Truck was tuned when new owner got it, has blown 2 head gaskets. Only thing we could find, head bolts were reused and not replaced both times. They were strechted not giving proper torque. That sounds more like an excuse that anything else to me. everything you have said so far points directly at a bad engine killing delete. copy the program out of the ecm and e-mail it to me for a proper review of what someone did... good, bad, and downright ugly. Eliminate that as a first step towards solving the other issues, or you will be destined to keep repeating the failures. ALSO.. an ISX has to be build exactly right.. so it also sounds like you used a bunch of incompetent or under-trained clowns to rebuild it too. here is what it takes to properly rebuild one... ref: http://rawze.com/forums/editpost.php?pid=70606 User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.