| OODO-New Delta-P and Map Sensors |
| 04-12-2018, (Subject: OODO-New Delta-P and Map Sensors ) Post: #1 | |||
| |||
 OODO-New Delta-P and Map Sensors Finally got around to installing the new DP-sensor and Map sensor today. The DP sensor comes in a kit ($98) which included all necessary hardware and a new pigtail. My truck already came issued with the upgrade but I went ahead and replaced the pigtail as I broke the retaining clip on the old one. Too brittle. Made sure to clean the ports while it was off. BTW, if you do install a new Delta-P, you need to get the ECM reset by someone who has the software. There is a possibility you can throw a code because the ECM uses a "learned" value for comparison purposes when you shut it down. Then if you have a new sensor it'll be looking for that value and if it's not correct, it'll throw a code. We'll see if it helps starting tomorrow. All last week the best mpg I was able to achieve was 8.1. We'll see. User's Signature: Dyin' ain't much of a living, driver. Put it down...it can wait. | |||
| 04-12-2018, (Subject: OODO-New Delta-P and Map Sensors ) Post: #2 | |||
| |||
RE: OODO-New Delta-P and Map Sensors (04-12-2018 )bossboy2 Wrote: ..http://rawze.com/forums/showthread.php?t...0#pid25590 User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.