Threaded Mode | Linear Mode

Mrkentee · 02-01-2019, **(Subject: Weller reman transmissions )**

What’s the general consensus on Weller reman transmissions?

Rawze · 02-01-2019, **(Subject: Weller reman transmissions )**

(02-01-2019 )Mrkentee Wrote: What’s the general consensus on Weller reman transmissions?

I got weller re-man rears,... no issues. Was less money than if I had rebuilt them myself by the time I got all new bearings, gears, etc.

Chamberpains · 02-02-2019, **(Subject: Weller reman transmissions )**

Yup, what he said. Pop yours out, swap the jewelry and slide the new 1 back in. Rebuilding them yourself is easy enough. Getting all the parts you need in a timely manner is where it really goes wrong. You'll get a part today a part tomorrow 5 or 6 on back order. Weller is the way to go.

Moose · 02-02-2019, **(Subject: Weller reman transmissions )**

I got 150k on an 18918b from them, shifting & splitting got better as time went on. It's doing fine now and I'd get another from them. The price and lack of downtime is worth it to me.

stevesparts · 02-02-2019, **(Subject: Weller reman transmissions )**

I've had a Weller with well over 500,000 on it it has performed very well.(13sp) but i might have hurt the input shaft with a bad shift under a load(my fault :( ) but they work great and save you the down time from getting yours rebuilt.