| CECU3 and PLC Connection |
| 11-29-2023, (Subject: CECU3 and PLC Connection ) Post: #1 | |||
| |||
| CECU3 and PLC Connection Does anyone have any experience with Paccar ESA and configuring a CECU3 units to allow Can Bus communications to and from a PLC (programmable logic controller)? Looking to be able to read speeds, loads, pressures, and temps and write commands such as PTO engagement and rpm set points. | |||
| 11-29-2023, (Subject: CECU3 and PLC Connection ) Post: #2 | |||
| |||
RE: CECU3 and PLC Connection (11-29-2023 )HeavyIndustry Wrote: Does anyone have any experience with Paccar ESA and configuring a CECU3 units to allow Can Bus communications to and from a PLC (programmable logic controller)? Most cummins engines have a data-link control available on them for that type of application. Might want to contact them and get some info on it and how to program/control it. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.