| Peterbilt 587 starting |
| 12-11-2023, (Subject: Peterbilt 587 starting ) Post: #10 | |||
| |||
| RE: Peterbilt 587 starting It seems like once it drops to 12.5v and less then it starts acting up | |||
| 12-18-2023, (Subject: Peterbilt 587 starting ) Post: #11 | |||
| |||
RE: Peterbilt 587 starting (12-11-2023 )Samj Wrote: It seems like once it drops to 12.5v and less then it starts acting up Did you find the cause of your problem or are you still having an issue? Voltage-wise you really shouldn't have an issue cranking until the resting/non-cranking voltage drops below 12.1 or so and even then a resting voltage of about 11.8v or better should still turn it over while only sounding a bit sluggish (assuming you have the same 4 battery setup that my 2012 587 has). User's Signature: "...And as we wind on down the road, Our Shadows taller than our Soul..." | |||
|
| 12-18-2023, (Subject: Peterbilt 587 starting ) Post: #12 | |||
| |||
| RE: Peterbilt 587 starting I'm thinking a bad starter....... User's Signature: It's hard to win an argument with a smart person, but it's damn near impossible to win an argument with a stupid person | |||
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.