Current draw key off
06-05-2018, (Subject: Current draw key off ) 
Post: #1
Current draw key off
What should I expect for current draw with the key off and no accessories fridge or inverter running? Thanks
(2011 prostar sleeper)


User's Signature: 2011 Prostar Cummins 871
replyreply
06-06-2018, (Subject: Current draw key off ) 
Post: #2
RE: Current draw key off
Maybe this helps...
http://rawze.com/forums/showthread.php?t...5#pid26925


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: DosGatos , 74bassman , Sergiu
07-12-2018, (Subject: Current draw key off ) 
Post: #3
RE: Current draw key off
(Back home working on truck)
1.0 then .42. After 30 seconds or less .24 amp
(2011 prostar high roof sleeper)


User's Signature: 2011 Prostar Cummins 871
replyreply
07-14-2018, (Subject: Current draw key off ) 
Post: #4
RE: Current draw key off
If you think you have high draw, put an amp clamp on the battery cables and remove 1 fuse/breaker at a time until it drops significantly. Then you'll know atleast which circuit you're chasing.
replyreply
 Thanks given by: Rawze , Moose , Sergiu
07-14-2018, (Subject: Current draw key off ) 
Post: #5
RE: Current draw key off
When I first tried with an inline ammeter I was seeing one amp and disconnecting. Didn't understand the current draw settles down if you give it time.


User's Signature: 2011 Prostar Cummins 871
replyreply
07-14-2018, (Subject: Current draw key off ) 
Post: #6
RE: Current draw key off
after some time idling ECM goes to hibernate state same as any computer.
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.