| Bypass connection thread size and pitch |
| 09-01-2018, (Subject: Bypass connection thread size and pitch ) Post: #1 | |||
| |||
| Bypass connection thread size and pitch Need to know the thread size and pitch to get hoses made for my bypass oil filter. Block off plug above the oil Pan and the plug on the oil cooler housing. Any help greatly appreciated I have three hours to get it done before the shop closes Don't have the option to pull it off and compare. I'm driving it User's Signature: Just another day and another dollar.....+Tax... | |||
| 09-01-2018, (Subject: Bypass connection thread size and pitch ) Post: #2 | |||
| |||
| RE: Bypass connection thread size and pitch 14mmx1.5 on the cooler, 18mmx1.5 on the block. O-ringed fittings. I used 1/2 NPT to 5/8 JIC on the filter housing. User's Signature: 2010 T2000, CM871, 13spd, 977k, tanker yanker Overhauled @ 927k | |||
|
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.