Threaded Mode | Linear Mode

Squish099 · 11-19-2020, **(Subject: CM870 loosing coolant/possible inflame )**

(11-19-2020 )Koren Wrote: Thanks for the replies. All of the pulleys spins fine. But I can't manually spin the crankshaft.
I tried to set up with Haggai but they are busy till December 7. I'm stopping driving at this time but I'm afraid I have to find a shop first since it probably won't start at all after I leave it for a couple of days.
Any shops you guys can recommend in GA/FL area who does an inframe?

How do I pull out the copy of the software of the ECM?

Just wait for haggai.. Theyre they only shop that is close to you that will build it right!

tree98 · 11-19-2020, **(Subject: CM870 loosing coolant/possible inflame )**

^^^^^^^ what he said ^^^^^^

You'll regret it otherwise trust me.

hhow55 · 11-19-2020, **(Subject: CM870 loosing coolant/possible inflame )**

Go to Haggai

Volvo8873 · 11-19-2020, **(Subject: CM870 loosing coolant/possible inflame )**

x4!!!! ^^^^^

amermextrucker · 11-20-2020, **(Subject: CM870 loosing coolant/possible inflame )**

Mr. HAGG will take care of you right and you're not that far. I went all the way from Illinois to see him. Well worth it.