Threaded Mode | Linear Mode

Andre_The_Giant · 08-23-2022, **(Subject: Borescope light )**

I am changing another injector tomorrow, i would love to make a light (like rawze use in video) for when I borescope the cylinder. Last time the light on my snap on tool wasn't good at all. Anyone have any suggestions or how to steps? Thanks in advanced

tree98 · 08-23-2022, **(Subject: Borescope light )**

I have one of these with a built in light, it works excellent.

https://amzn.to/3CsRRhi

Andre_The_Giant · 08-23-2022, **(Subject: Borescope light )**

the built in light in mine sucks =( im trying to take a flashlight apart now

Rawze · 08-23-2022, **(Subject: Borescope light )**

(08-23-2022 )Andre_The_Giant Wrote: the built in light in mine sucks =( im trying to take a flashlight apart now

yeah.. my only complaint for my very expensive BK8000 Snap-on boroscope.. is the damn camera light is not bright enough for squat nothing. That is why I made that flashlight thingy.

Andre_The_Giant · 08-24-2022, **(Subject: Borescope light )**

here are some pictures i took today, let me know what yall think. no additional lighting was ever made =( idk if this is oil, carbon or cracking

tree98 · 08-24-2022, **(Subject: Borescope light )**

Carbon buildup

Rawze · 08-24-2022, **(Subject: Borescope light )**

(08-24-2022 )Andre_The_Giant Wrote: here are some pictures i took today, let me know what yall think. no additional lighting was ever made =( idk if this is oil, carbon or cracking

That is known as fuel impingement.

excess injection timing among other things can cause that.