Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Pete & KW related Help... / T880 won't overinflate, any ideas where to start

new reply
T880 won't overinflate, any ideas where to start
05-18-2025, (Subject: T880 won't overinflate, any ideas where to start ) 
Post: #1
aktruckerdad Offline
Established  (0 Likes)  **

 		Posts: 2
Joined: May 2025
Thanks: 0
Given 0 thank(s) in 0 post(s)
T880 won't overinflate, any ideas where to start
T880 won't overinflate, I have 2 levelers,one on rear frame and one on passenger side frame,I unhooked arm on rear leveler and it will fill/dump when I lift bar up and down...any suggestions what next?
Return to Top | find
replyreply
05-18-2025, (Subject: T880 won't overinflate, any ideas where to start ) 
Post: #2
Rawze Offline
Forum Reject  (14509 Likes)  *******

 		Posts: 11,700
Joined: Jun 2013
Thanks: 6194
Given 14509 thank(s) in 6412 post(s)
RE: T880 won't overinflate, any ideas where to start
regulated pressure is not high enough?.

you also need to ensure your not exceeding the bag pressure spec too.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
05-18-2025, (Subject: T880 won't overinflate, any ideas where to start ) 
Post: #3
aktruckerdad Offline
Established  (0 Likes)  **

 		Posts: 2
Joined: May 2025
Thanks: 0
Given 0 thank(s) in 0 post(s)
RE: T880 won't overinflate, any ideas where to start
It is high enough
Return to Top | find
replyreply
new reply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication