EGR BOLTS FROZEN |
11-22-2016, (Subject: EGR BOLTS FROZEN ) Post: #1 | |||
| |||
EGR BOLTS FROZEN Doing EGR tune on an 09 cm871 and can't break the 2 10m bolts loose holding the exhaust tube on top of EGR. Any suggestions would be welcome. User's Signature: Slow Minded not Stupid. | |||
11-22-2016, (Subject: EGR BOLTS FROZEN ) Post: #2 | |||
| |||
RE: EGR BOLTS FROZEN 50/50 mix of dextron 3 and acetone. Likely you will be obligated to remove the EGR valve if you break one of them off (happens very often), drill out the hole, and use a longer screw, lock washer, and nut to replace it. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.