Swapping from cm2350 to older isx

[Petegraintrain]

What all has to be done to swap from a cm2350 to either a cm870 or a signature 600? Found out my block is toast

[Rawze]

One thing that is need is to re-register the truck as a 'glider' to make it legal again as per the replacement engine's emissions standards.

It will also not be legal to drive in the communist state out on the west coast any more.

[Petegraintrain]

(03-17-2022 )Rawze Wrote:  One thing that is need is to re-register the truck as a 'glider' to make it legal again as per the replacement engine's emissions standards.

It will also not be legal to drive in the communist state out on the west coast any more.

I stay in Canada so no worries there

[herschel]

i asked the same question a little while ago, 870 isx in place of a 871isx with a hole in the block.interested in the answer as far as the elecrical and wiring harness to the cab. not going to be a highway puller just field to farm in canada.dosen't need to be perfect or have 565hp.do not want to just try the wiring harness for a 870 isx to 2009 pete for 2800$. for sure somebody has done this swap with some sort of luck.

[Rawze]

maybe this thread has some related info too.
http://rawze.com/forums/showthread.php?t...7#pid69987