Threaded Mode | Linear Mode

74bassman · 05-10-2018, **(Subject: Prostar AC compressor )**

Got part numbers from Rush. Going to call truckerac and see what they have.

74bassman · 05-10-2018, **(Subject: Prostar AC compressor )**

Hey Mike, that TBD involving that blower motor harness, where did you get it? Rush is telling me 110.00 for aftermarket and 169 for a international.

74bassman · 05-10-2018, **(Subject: Prostar AC compressor )**

I think I got all my parts. Compressor, thermomister kit, high pressure sensor, expansion valve, dryer, o ring kit. I didnt get the tool for the flushing, still have to find. Maybe I can find a shop to evac the system and do a flush.

Rawze · 05-10-2018, **(Subject: Prostar AC compressor )**

My A/C just simply works. I got tired of chasing that crap design long ago...
http://rawze.com/forums/showthread.php?t...2#pid15312

74bassman · 05-10-2018, **(Subject: Prostar AC compressor )**

Just got the parts, crank the truck up a main belt breaks, looks like the pulley from the water pump just froze up.

74bassman · 05-10-2018, **(Subject: Prostar AC compressor )**

False alarm, once I got the smaller belt off the AC compressor, and water pump, the water pump pulley spun freely. The AC Compressor pulley completely sieze up. I put the main belt on drove the truck home. Ill fix the ac tomorrow. It is beer 30.

Thanks Waterloo

74bassman · 05-11-2018, **(Subject: Prostar AC compressor )**

Time to start tearing into this. I got my tablet set on YouTube. This guy name Rawze is on it, so ill watch his AC video while i do this.

74bassman · 05-11-2018, **(Subject: Prostar AC compressor )**

Rawze, where do I get the parts to build that device?

aeIAzdLZ · 05-11-2018, **(Subject: Prostar AC compressor )**

Do you need alignment for compressor pulley before you tighnet bolt on compressor ?
I just got new compressor and wondering if I have to do it or just tighten bolts and that it