Massive oil leak...

[Pete1990]

I don't really have away on steam cleaning the engine. i don't think this shop does either its a small shop by st louis. but im have them check the filter under pressure make sure the seal isn't leaking or somthing

[Chamberpains]

Get a case of brake clean then and start hosing off the oil. Degreaser and a garden hose. You need to clean it up some how. Get creative.

[Pete1990]

Well its caused by Blow by.. White smoke is pouring out the exhaust and blow by and oil fill tube.

[Moose]

Before making the sign of the cross, isolate the turbo, make sure you don't have a blown shaft seal.

[Pete1990]

(07-23-2018 )Moose Wrote:  Before making the sign of the cross, isolate the turbo, make sure you don't have a blown shaft seal.

That was the first thing the shop did this morning.
Here is the video of the blow by
https://youtu.be/DXZmB8W-cRY

[Rawze]

(07-23-2018 )Pete1990 Wrote:  

(07-23-2018 )Moose Wrote:  Before making the sign of the cross, isolate the turbo, make sure you don't have a blown shaft seal.

That was the first thing the shop did this morning.
Here is the video of the blow by
https://youtu.be/DXZmB8W-cRY

A cracked piston will do that.

[Moose]

Hory shet.....

My most heartfelt apologies.

[snailexpress]

(07-23-2018 )Rawze Wrote:  

(07-23-2018 )Pete1990 Wrote:  

(07-23-2018 )Moose Wrote:  Before making the sign of the cross, isolate the turbo, make sure you don't have a blown shaft seal.

That was the first thing the shop did this morning.
Here is the video of the blow by
https://youtu.be/DXZmB8W-cRY

A cracked piston will do that.

Hate to confirm. My did absolutely same.

[Starlight]

I'm sorry about that but you have a hole in one of your pistons.