Transmission or clutch

[sstrong1]

I think my transmission or clutch is going. It’s shifting at very irregular rpms. It will go as low as 600 rpm in high gear without stalling and I know that’s not normal. I just down shifted and it went as high as 2000 rpm and hasn’t done that before either. Can anyone narrow it down between the clutch or transmission for me. Thanks

[Wiseman]

Your description sounds like a slipping clutch.
Check/adjust pedal travel , linkage,inspect clutch.
If still slipping = clutch time

[sstrong1]

Do you know how much that is

[Lonestar10]

Few grand shop I go to puts in 2050 tq clutches in even if truck is 1650 as theyve seen them last longer than at spec clutches

[Lonestar10]

Clutch adjust at a good shop if all your parts are good maybe 50-100 bucks with no repairs

[sstrong1]

What’s the average cost of labor to check the clutch. I don’t want to get overpriced

[Magard]

Is this a automatic?

[flatbed94kid]

My guess is parts cost about 900 for a standard tranny. Some say 10 hours of labor.
For a clutch.


My clutch parts cost around 2850. Then 14 hours of labor. For an automatic.

[Lonestar10]

if your clutch doesnt need any new parts and only needs adjusting a good tech can adjust a clutch in 30minutes but youll probably be charged an hour. so figoure an hours labor in the range of 90-150 per hour depending on the shop.