Insite for CM2250 or CM2350

[Casper]

Can anyone tell me which version of Insite is recommended for CM2250 or CM2350? Best place to purchase?

[tree98]

Most guys on here are using insite 7.6.2 with an inline 5 or 6 adapter. You can get the Chinese version from ebay.

https://rover.ebay.com/rover/0/0/0?mpre=...4393615601

Might be cheaper ones to, this is just the first one I came across.

[Casper]

(09-12-2019 )tree98 Wrote:  Most guys on here are using insite 7.6.2 with an inline 5 or 6 adapter. You can get the Chinese version from ebay.

https://rover.ebay.com/rover/0/0/0?mpre=...4393615601

Might be cheaper ones to, this is just the first one I came across.

Thank you for the response! Been using working/running an N14 for years. As someone on here stated, it IS virtually impossible to get any kind of Quality re-manned parts for this engine (N14), just trying to prep for an upgrade to a newer engine and truck!

[Casper]

(09-12-2019 )tree98 Wrote:  Most guys on here are using insite 7.6.2 with an inline 5 or 6 adapter. You can get the Chinese version from ebay.

https://rover.ebay.com/rover/0/0/0?mpre=...4393615601

Might be cheaper ones to, this is just the first one I came across.

Does this program require a password or registration through a Cummins Dealer? Monthly subscription fee?

[Waterloo]

(10-26-2019 )GreenBean Wrote:  

(09-12-2019 )tree98 Wrote:  Most guys on here are using insite 7.6.2 with an inline 5 or 6 adapter. You can get the Chinese version from ebay.

https://rover.ebay.com/rover/0/0/0?mpre=...4393615601

Might be cheaper ones to, this is just the first one I came across.

Does this program require a password or registration through a Cummins Dealer? Monthly subscription fee?

You should be good to go with the eBay kit, everything should be there for you to operate it out of the box without fees.

[Casper]

(10-26-2019 )Waterloo Wrote:  

(10-26-2019 )GreenBean Wrote:  

(09-12-2019 )tree98 Wrote:  Most guys on here are using insite 7.6.2 with an inline 5 or 6 adapter. You can get the Chinese version from ebay.

https://rover.ebay.com/rover/0/0/0?mpre=...4393615601

Might be cheaper ones to, this is just the first one I came across.

Does this program require a password or registration through a Cummins Dealer? Monthly subscription fee?

You should be good to go with the eBay kit, everything should be there for you to operate it out of the box without fees.

O.k., Then maybe I'm missing something. I installed on the laptop, hooked it up and the first thing...I get a pop-up message saying that I need to register the product with a cummins dealer and receive a password?

[Casper]

(10-26-2019 )GreenBean Wrote:  

(10-26-2019 )Waterloo Wrote:  

(10-26-2019 )GreenBean Wrote:  

(09-12-2019 )tree98 Wrote:  Most guys on here are using insite 7.6.2 with an inline 5 or 6 adapter. You can get the Chinese version from ebay.

https://rover.ebay.com/rover/0/0/0?mpre=...4393615601

Might be cheaper ones to, this is just the first one I came across.

Does this program require a password or registration through a Cummins Dealer? Monthly subscription fee?

You should be good to go with the eBay kit, everything should be there for you to operate it out of the box without fees.

O.k., Then maybe I'm missing something. I installed on the laptop, hooked it up and the first thing...I get a pop-up message saying that I need to register the product with a cummins dealer and receive a password?

[Moose]

You need to get with the seller and ask these questions. It says in the auction that the KG is included. Rawze doesn't like this discussed here.

[Waterloo]

Will get shut down here, like Moose said