Overshot's Blog |
08-23-2016, (Subject: Overshot's Blog ) Post: #19 | |||
| |||
RE: Overshot's Blog Imo is not a coolant leak inside the engine.....you must show boron,sodium and potassium...yes all three for a coolant in oil Mr lee you are using delo15w-40 this oil has the highest 557ppm boron count since new ...absolute highest of all ((rotela 42ppm, delvac 73)) Yes boron is in most antifreeze but is used in the oils as additive Delo has <5 ppm counts of potassium in the oil but is an additive in gear oil too, yours is not very high Delo has <5 ppm of sodium in oil already Are using gear oil???? Aluminum is found in Pistons,bearings and pumps ...so maybe your coolant pump is going downhill!!!! Dell has 3ppm aluminum already....highest And the TBN is the lowest of all big 3 oil ...only 8.86....((((delvac 11.0, rotela 10.6)) The TBN is not supposed to be left to drop more Than 1/2 of it since new before changing oil So theoretically u must change the oil sooner than 17k miles... | |||
08-23-2016, (Subject: Overshot's Blog ) Post: #20 | |||
| |||
RE: Overshot's Blog T680 I use delo | |||
08-24-2016, (Subject: Overshot's Blog ) Post: #21 | |||
| |||
RE: Overshot's Blog T680How can the coolant pump be a problem. Oil is in no way around the water pump for it is external pump belt driven.... Unlike cat or detroit or even volvo. | |||
08-24-2016, (Subject: Overshot's Blog ) Post: #22 | |||
| |||
RE: Overshot's Blog That îs right mr.hagg..... | |||
08-24-2016, (Subject: Overshot's Blog ) Post: #23 | |||
| |||
RE: Overshot's Blog Mine just came in.....wish I know how to post it Alum 0 Iron 2 Cooper 0 Lead 0 Molly 17. Boron 105 magnesium 85. All good Lots of zinc,phosphor,calcium. Very good Tbn. 6.17. No sodium low potassium 1gal of gear oil. Rottela 15-40 | |||
08-24-2016, (Subject: Overshot's Blog ) Post: #24 | |||
| |||
RE: Overshot's Blog (08-24-2016 )T680 Wrote: Mine just came in.....wish I know how to post it Great results. How many miles on this oil? What are zinc readings? User's Signature: Cascadia ISX15 CM2350 | |||
08-24-2016, (Subject: Overshot's Blog ) Post: #25 | |||
| |||
RE: Overshot's Blog Oil 10 k Engine 301 k Zinc 1287 soot<.1, Ceck ((abc of oil analysis, at http://www.thedieselstop.com They say that for coolant in oil must have boron,sodium and potassium high readings For bearing problems must see cooper,tin and lead high | |||
08-24-2016, (Subject: Overshot's Blog ) Post: #26 | |||
| |||
RE: Overshot's Blog This is mine 60000 miles on Inframe, oil has 15000 miles. Have a look and let me know if you see any problems | |||
08-25-2016, (Subject: Overshot's Blog ) Post: #27 | |||
| |||
RE: Overshot's Blog | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.