| 870 turbo intake temp sensor wiring |
| 08-24-2025, (Subject: 870 turbo intake temp sensor wiring ) Post: #1 | |||
| |||
| 870 turbo intake temp sensor wiring I have an 870 here that hasn't run in a few years. I took some of it apart and did a little paint work, then it sat for a while and now im back on it putting it all back together. Can anyone tell me if there is a short harness that connects these or where does the sensor plug into the harness on these 870's? | |||
| 08-25-2025, (Subject: 870 turbo intake temp sensor wiring ) Post: #2 | |||
| |||
| RE: 870 turbo intake temp sensor wiring Should a straight through connection, that one on top looks like for something on vacation. | |||
| 12-11-2025, (Subject: 870 turbo intake temp sensor wiring ) Post: #3 | |||
| |||
| RE: 870 turbo intake temp sensor wiring There is, may be a day late and a dollar short on responding for ya! Cummins part #3683086 was the one required for my 04 CM870 530hp. It should go into that connector shown on your engine harness. Hope this helps ya out. | |||
|
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.


