EGR BOLTS FROZEN
11-22-2016, (Subject: EGR BOLTS FROZEN ) 
Post: #1
EGR BOLTS FROZEN
Doing EGR tune on an 09 cm871 and can't break the 2 10m bolts loose holding the exhaust tube on top of EGR. Any suggestions would be welcome.


User's Signature: Slow Minded not Stupid.
replyreply
11-22-2016, (Subject: EGR BOLTS FROZEN ) 
Post: #2
RE: EGR BOLTS FROZEN
50/50 mix of dextron 3 and acetone.

Likely you will be obligated to remove the EGR valve if you break one of them off (happens very often), drill out the hole, and use a longer screw, lock washer, and nut to replace it.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: Kiroisx




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.