crank case pressure

[Waterloo]

(12-25-2016 )tariqzai Wrote:  Update!! After using that coolant sealant truck ran fine for about 48k miles, now pushing coolant through the radiator tank exhaust valve, will only push coolant when idling at high RPM, I noticed that when I started a park regen and coolant was pushed so hard that it was falling on hood of truck parked next. Truck has now about 694k miles, like previously mentioned I have another engine of same specs, mechanic is asking 3500.00 labor for the swap, that engine has 725k miles, need an advice if I should go for engine swap or just fix the issue, or just use that sealant again and see if I can get another 50k.

I hate to say this, but welcome to the club... In Frame "bitch" or swap and deal with the same issue in a few months. 600 to 800,000 miles is the limit on these motors, if you are lucky... Did I just say that? LOL! Welcome to the club. ;-) Still licking my wounds. And you can call me a white man, I will not take offense. ;-)