Zero pressure cooling system

[Hammerhead]

(03-12-2017 )Magard Wrote:  I like the idea of a small leak vs. say a blown hose in bfe. I'm running more hp than you are rawze. I'm pretty much breaking your economy suggestions for my own reasons. Trying to incorporate what I can back in. Would you say high hp could make cavitation issues substantially worse or, water temp is water temp no matter if it's hp or a dirty radiator getting you there. I'm leaning towards as long a hp isn't above a fairly stock setting it shouldn't make much difference. What do you say?

You don't happen to have a Gandfather that came from Tennessee do you? Maybe a little inspiration for that condenser.

I have a 2919 CPL CM871 rated at 550/1850 with the NO HP increase @m*m^2 overlay. A 2919 CPL is the big injectors and the big turbo.
I pull roughly 180k gross for a living, and I NEVER let my coolant get to 230*.
I doubt very much that your slight HP increase will give you less desirable heat buildup and retention than I have.