| Isx cm2250 exhaust gas pressure |
| 05-03-2017, (Subject: Isx cm2250 exhaust gas pressure ) Post: #3 | |||
| |||
| RE: Isx cm2250 exhaust gas pressure "Cuffing" is not normal at all and destructive to the turbo. Possible causes come to mind ... * bad sensors like the IMAP, EGR, or Exhaust BP sensor. * Excess back-pressure on the exhaust system (clogged DOC, DPF, SCR, decomp-tube etc.). * EGR valve not operating correctly, or EGR circuits/ EGR delta-P tubes clogged. * CAC leak making the turbo over-spool just to keep up. * turbo out of calibration. * Wrong program in engine because someone tried to up the power incorrectly. == EGR tune-up, removal of all the cans and inspect their faces, inspect decomp tube for blockage, replace old sensors. That is a good start. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Isx cm2250 exhaust gas pressure - dslmchnc - 05-03-2017, RE: Isx cm2250 exhaust gas pressure - dslmchnc - 05-03-2017, RE: Isx cm2250 exhaust gas pressure - orionlover69 - 06-11-2017, RE: Isx cm2250 exhaust gas pressure - Rawze - 01-17-2018, RE: Isx cm2250 exhaust gas pressure - Rawze - 05-03-2017 RE: Isx cm2250 exhaust gas pressure - dslmchnc - 05-05-2017, RE: Isx cm2250 exhaust gas pressure - Rawze - 05-05-2017, RE: Isx cm2250 exhaust gas pressure - Waterloo - 05-06-2017, RE: Isx cm2250 exhaust gas pressure - JMBT - 05-07-2017, RE: Isx cm2250 exhaust gas pressure - Cuya - 05-08-2017, RE: Isx cm2250 exhaust gas pressure - zyNoT - 06-08-2017, RE: Isx cm2250 exhaust gas pressure - Rawze - 06-09-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.