Tools needed to do your own road side tire swap?

[AussieISX]

It would be extremely rare to find an operator here that doesn't have the equipment to change a flat tire with them , a driver not capable of doing a flat tyre change would be ridiculed generally. Must be a different world over there in the transport industry. I personally keep a steer and drive wheel bearing set and small amount of 85/140 , alternator, all idler bearings, fan and a/c belts , starter motor , boost hoses , 2.5" silicon hose for coolant hoses , all sorts of o-rings clamps and all the tools required to change any of the components that I carry as spares . To get a so called mechanic out costs a ridiculous amount and takes more time sitting waiting than just getting on with it yourself. Not everyone carrys all the gear I do but a lot of guys do