| J1939 Problem |
| 08-15-2017, (Subject: J1939 Problem ) Post: #1 | |||
| |||
| J1939 Problem I think I may have screwed something up. Have a toggle switch to turn off/on body controller. Was a little pissed off at truck for typical 5018 regen code. Flipped the on/off couple times real fast, and now don't think my J1939 codes are reading anymore. I do not have insite or anything decent yet, just a ScanGauge. Usually it shows the J1708 and J1939 codes, now just the J1708 codes. If I clear codes while truck is off and restart truck it gives me a datalink error for the ecm one time then goes away. Any ideas on what I screw up? | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
J1939 Problem - Prostar14556 - 08-15-2017 RE: J1939 Problem - Rawze - 08-15-2017, RE: J1939 Problem - Prostar14556 - 08-15-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.