Havig a bad day. CM2350 fuel pump failure.

[Squish099]

Ok.. I haven't gotten in to the xpi pump yet, but I was thinking, there's a drain from the pump that runs into the block? Right? Why couldn't a person tap said drain run a pipe plug down in it, then drill from outside the block back into drain channel, tap that hole and use an fitting or something to another filter, and drain back to the pan.. Or something similar.. That way should the pump explode its caught externally before going into the oil pan.. Or am I completely over thinking this? I think if it could be done it would be of great benefit to all 2250/2350/x owners...