Help needed
10-08-2017, (Subject: Help needed ) 
Post: #9
RE: Help needed
update on the last test with fluctuating ohms. I checked my meter and found that one of my leads what a exposed cable. Replaced the fluke's cable and now I did a full test from nominal and resistance tests and found no problem. I will continue by replacing all the tarnish fuses and clean the rest of the breakers in the fuse panel. There are 3 out of 5 led's burned on my rear break light. Will update once i get done with that.
replyreply


Messages In This Thread
Help needed - INTERPRO - 10-08-2017,
RE: Help needed - kmk - 10-08-2017,
RE: Help needed - Rawze - 10-08-2017,
RE: Help needed - INTERPRO - 10-08-2017,
RE: Help needed - kmk - 10-08-2017,
RE: Help needed - INTERPRO - 10-08-2017,
RE: Help needed - Rawze - 10-08-2017,
RE: Help needed - INTERPRO - 10-08-2017,
RE: Help needed - INTERPRO - 10-08-2017
RE: Help needed - INTERPRO - 10-15-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.