Well, she bit the dust, In Frame this week...

[Waterloo]

(04-07-2016 )mkmac Wrote:  

(04-04-2016 )Waterloo Wrote:  

(04-04-2016 )mkmac Wrote:  

(04-04-2016 )Waterloo Wrote:  Well, called the dealer this morning... CM-871 head and injector cam are on back order... They think they found a Head and it may ship tomorrow, no clue on the cam, hopefully by end of this week... Scratch that, I found the cams and called the dealer... One of each up the road... Got to do all the damn work yourself anymore!

You might have done it already but that hub on the fan pulley looks probably needs a bearing kit done. just saying

I asked about that too... That hub ain't cheap, and right now I'm about tapped... Not having any issues with it, and plan on fixing it here in the driveway soon... Need to get on the road and making some money.

You don't have to change the hub just the bearings cummins has a kit it was under a hundred dollars but you can go to your local bearing supplier for probably under twenty,it's an easy job.....

I'm putting a new hub on... I got thinking about it, two of my bearings were bad on the tensioners, I just called and told then to put a new hub assembly on and be done with it. I thought about it, and can see the entire thing failing a day or two after I get the truck back... It will look good with the new fan blade. ;-)