Oil temp
11-01-2017, (Subject: Oil temp ) 
Post: #12
RE: Oil temp
What are water temps. Also what is pyro temps. 5 extra degrees of water temp will make oil temps to high. Oil temp sender like rawze said. Start simple. Fan cut in of 210 makes for 250 degree oil temp. Lower fan cut in temp or run manual fan switch on. Red flag "recalibrate ecm" what is going on there. Tells me someone has been in your ecm. Programming doesn't just become a problem on its own.
replyreply
 Thanks given by: Rawze , Waterloo


Messages In This Thread
Oil temp - 808allstarr - 10-16-2017,
RE: Oil temp - Waterloo - 10-16-2017,
RE: Oil temp - Rawze - 10-16-2017,
RE: Oil temp - DKenworth - 10-16-2017,
RE: Oil temp - Aussie Steve - 10-17-2017,
RE: Oil temp - Rawze - 10-17-2017,
RE: Oil temp - 808allstarr - 10-31-2017,
RE: Oil temp - hhow55 - 11-01-2017,
RE: Oil temp - 808allstarr - 11-01-2017,
RE: Oil temp - Rawze - 11-01-2017,
RE: Oil temp - trucklogger2 - 11-01-2017,
RE: Oil temp - Magard - 11-01-2017
RE: Oil temp - sirrepairsalot - 11-01-2017,
RE: Oil temp - Magard - 11-01-2017,
RE: Oil temp - sirrepairsalot - 11-01-2017,
RE: Oil temp - 808allstarr - 11-01-2017,
RE: Oil temp - Rawze - 11-01-2017,
RE: Oil temp - rapidisimo - 08-13-2019,
RE: Oil temp - Rawze - 08-13-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.