Oil temp |
11-01-2017, (Subject: Oil temp ) Post: #15 | |||
| |||
RE: Oil temp (11-01-2017 )sirrepairsalot Wrote: I had a stock programmed ecm, 565hp ISX CM870, clean and straight rad, oil cooler was good too when I pulled it to service it. Fan operated properly, kicked in at 180, in fact one hot day I ran the fan the whole trip to keep it at 240 degrees and then I pulled the thermostat. Did the trick. Runs as cool as the coolant temp now. Retarded idea... Is there any negative side effects or issues running without t stat??? Jus wondering it wasnt always an issue so something else must be wrong and in case that prob is solved having it out could cause more probs. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Oil temp - 808allstarr - 10-16-2017, RE: Oil temp - Waterloo - 10-16-2017, RE: Oil temp - Rawze - 10-16-2017, RE: Oil temp - DKenworth - 10-16-2017, RE: Oil temp - Aussie Steve - 10-17-2017, RE: Oil temp - Rawze - 10-17-2017, RE: Oil temp - 808allstarr - 10-31-2017, RE: Oil temp - hhow55 - 11-01-2017, RE: Oil temp - 808allstarr - 11-01-2017, RE: Oil temp - Rawze - 11-01-2017, RE: Oil temp - trucklogger2 - 11-01-2017, RE: Oil temp - Magard - 11-01-2017, RE: Oil temp - sirrepairsalot - 11-01-2017, RE: Oil temp - Magard - 11-01-2017, RE: Oil temp - sirrepairsalot - 11-01-2017, RE: Oil temp - 808allstarr - 11-01-2017 RE: Oil temp - Rawze - 11-01-2017, RE: Oil temp - rapidisimo - 08-13-2019, RE: Oil temp - Rawze - 08-13-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.