| Low beam fault |
| 12-11-2017, (Subject: Low beam fault ) Post: #3 | |||
| |||
| RE: Low beam fault I would suspect that an LED bulb wired backward would not come on at all. LED does stand for Light Emitting Diode,... Diode being that key word... Wikkipedia... Quote:The most common function of a diode is to allow an electric current to pass in one direction (called the diode's forward direction), while blocking it in the opposite direction (the reverse direction). As such, the diode can be viewed as an electronic version of a check valve. I think people too easily forget that about them. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Low beam fault - Skman - 12-11-2017, RE: Low beam fault - Bigstank - 12-11-2017, RE: Low beam fault - Rawze - 12-11-2017 RE: Low beam fault - Skman - 12-11-2017, RE: Low beam fault - stevesparts - 12-14-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.