crank case pressure
03-18-2018, (Subject: crank case pressure ) 
Post: #41
RE: crank case pressure
I ran Rawze's manometer test on my3/2013 model 2350 isx 600 460,000 miles and at idle the level of separation was 5" and at 1500 rpms it went down to 2.5". That being said, I have plenty of power and no noticable problems other than oil consumption ,3 gallons in 10,000, and the smell of burning engine oil when coming to a stop. No exterior oil leaks. My next step is to get an oil analysis. I still think this is an odd result. Any ideas ( If this is the wrong thread for this please Redirect me, thanks).
replyreply


Messages In This Thread
crank case pressure - scowman - 02-26-2016,
RE: crank case pressure - Cuya - 02-26-2016,
RE: crank case pressure - ynot - 03-05-2016,
RE: crank case pressure - ynot - 03-05-2016,
RE: crank case pressure - Vin - 07-23-2016,
RE: crank case pressure - Vin - 07-24-2016,
RE: crank case pressure - Cuya - 01-23-2017,
RE: crank case pressure - CenPen777 - 03-18-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.