Oil samples
05-01-2016, (Subject: Oil samples ) 
Post: #4
RE: Oil samples
(04-30-2016 )dbl overdrive Wrote:  
(04-30-2016 )Rawze Wrote:  doesn't look that bad to me outside of copper itself. 2nd oil sample has 19k miles on it and your iron matches this to show normal wear.

copper can come from a lot of different places.
I was looking at coment where it says somthing about oil cooler leaching copper. But no coolant is present.
I changed that cooler last year so hopefully it's not starting to fail allready. But I thought it looked pretty good other than that.
I just replaced that compressor so I wonder if that had something to do with it.
Aluminum and copper together! Check the bearings overhead at least. Once i got same report it was


Attached File(s)Image(s)
./uploads/201605/post_1794_1462110872_a9f0a9397047dd1410ddf4c629a2ff4a.jpg./uploads/201605/post_1794_1462110818_20f8310b57b1324e6b0a3644a73cb0f3.jpg
replyreply


Messages In This Thread
Oil samples - dbl overdrive - 04-30-2016,
RE: Oil samples - Rawze - 04-30-2016,
RE: Oil samples - snailexpress - 05-01-2016
RE: Oil samples - snailexpress - 05-01-2016,
RE: Oil samples - Signature620 - 05-01-2016,
RE: Oil samples - Rawze - 05-02-2016,
RE: Oil samples - Waterloo - 05-04-2016,
RE: Oil samples - snailexpress - 05-06-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.