Turbo

[Rawze]

(06-17-2018 )Roberts388 Wrote:  ...
Cool deal. Any links to info for installing one?? Im running into airflow issues on my x15 and its running pretty hot temps coming out of the compressor so needing an upgrade but needing to keep the VGT as well. Im new to playing with the big cummins but have played with the smaller ones quite a bit.

NO links for such things but Unilevers, Gearhead, Mommaburt, Mr.Hag, have the ability to dial one in correctly.

Question is that are you trying to do it on a CM2350 (2013 - 2017 engine)? or the new X15 (2018 engine)? - Your bio says 2018 X15, but your first post implies otherwise.



Lastly there is this to think about and consider (re-post) ...

Rawze Wrote:What is the origional HP rating on the engine?

Is it de-mandated?, and if so Who did it/how was it done?

What is the current (or expected) HP settings?

What kind of truck? What kind of operation? what is the average torque requirement? -- (I.E. most highway trucks on the USA average about 28-30% torque load on average).

What would you expect to gain/what would be your expected goals from altering the turbo with a different model?

Is fuel mileage more important to you after such a change? -- Or power?

These are good things to think about before considering making changes to the engine design.

Also, what are you considering "hot"? -- temps? some data? etc?.