10 speed with a 3.70 or 3.90?

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-28-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

10 speed with a 3.70 or 3.90?

08-21-2018, (Subject: 10 speed with a 3.70 or 3.90? )

Post: #6

Redland1 Offline

Offline

Established (44 Likes)

Posts: 495
Joined: Aug 2018

Thanks: 477
Given 44 thank(s) in 34 post(s)

RE: 10 speed with a 3.70 or 3.90?

(08-21-2018 )Rig Wrench Wrote:
(08-20-2018 )Redland1 Wrote: Looking at Mack MP8 with 10 speed in either 3.70-3.90.Will be for running flatbed 80k most of the time.Which gear ratio will be better?
Run away fast. I hate those things. Especially with a maxitorque trans. Constant wire harness issues, injector cup issues, injector issues, water pump problems, ect ect.
This gem of a d13 had a air compressor go bad with a load of black top on. A cummins or cat could be chan changed out before the load set up. Not on this chitball. Its a 6-10 hour job to do that. No thanks
That being said, id go 370 with short rubber and 390 if your runnin tall

More problems than the Cummins 2250 and Detroit DD’s?

Return to Top | find

« Next Oldest | Next Newest »

Messages In This Thread

10 speed with a 3.70 or 3.90? - Redland1 - 08-20-2018,

RE: 10 speed with a 3.70 or 3.90? - Volvo8873 - 08-20-2018,

RE: 10 speed with a 3.70 or 3.90? - Redland1 - 08-20-2018,

RE: 10 speed with a 3.70 or 3.90? - Rig Wrench - 08-21-2018,

RE: 10 speed with a 3.70 or 3.90? - Redland1 - 08-21-2018

RE: 10 speed with a 3.70 or 3.90? - kryten - 08-21-2018,

RE: 10 speed with a 3.70 or 3.90? - Evotrucker - 08-22-2018,

RE: 10 speed with a 3.70 or 3.90? - Evotrucker - 08-22-2018,

RE: 10 speed with a 3.70 or 3.90? - Chamberpains - 08-22-2018,

RE: 10 speed with a 3.70 or 3.90? - Volvo8873 - 08-22-2018,

RE: 10 speed with a 3.70 or 3.90? - Redland1 - 08-23-2018,

RE: 10 speed with a 3.70 or 3.90? - Rig Wrench - 08-25-2018,

RE: 10 speed with a 3.70 or 3.90? - Redland1 - 08-24-2018,

RE: 10 speed with a 3.70 or 3.90? - Chamberpains - 08-25-2018,

RE: 10 speed with a 3.70 or 3.90? - Redland1 - 08-25-2018,

RE: 10 speed with a 3.70 or 3.90? - Rawze - 08-25-2018,

RE: 10 speed with a 3.70 or 3.90? - Zusky407 - 08-25-2018,

RE: 10 speed with a 3.70 or 3.90? - JMBT - 08-25-2018,

RE: 10 speed with a 3.70 or 3.90? - Redland1 - 08-27-2018,

RE: 10 speed with a 3.70 or 3.90? - Rawze - 08-28-2018,

RE: 10 speed with a 3.70 or 3.90? - Billdozer2 - 08-29-2018,

RE: 10 speed with a 3.70 or 3.90? - Redland1 - 08-29-2018,

RE: 10 speed with a 3.70 or 3.90? - Rawze - 08-29-2018,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design