New Herd Defender Moose Slayer Bumper...
12-27-2018, (Subject: New Herd Defender Moose Slayer Bumper... ) 
Post: #1
New Herd Defender Moose Slayer Bumper...
Well, I did it, bought a bumper... Had it installed today. I think it looks pretty cool! And as many of you will wonder, how heavy is it? I figure around 400 - 500 lbs... I weighed the truck after the install, and I know... Bob tail, 1/2 tanks, steers 12,360, drives 9,000... And you can feel it... 12,000 lb axle from the factory, I'll see what it is with the trailer on next week when I go back to work. Worst case, I throw a 14,000 lb axle on, already priced out. Cost, roughly $4,000 after discounts from Raney's out of Florida. Dropped shipped from Winnipeg, took two days to get to Detroit area. A new OEM bumper, which mine was trashed, was darn near $4000, and I did need a bumper. Here are some photos...

./uploads/201812/post_218_1545957648_22ab6fe5c8b07fd0c5f039d3b5446e04.jpg

./uploads/201812/post_218_1545958355_9c274b98eeb37946e75e6d2d6287fa4d.jpg
replyreply
 Thanks given by: Nostalgic , Rawze , Rounded_nut , Volvo8873 , ZeroNthedark


Messages In This Thread
New Herd Defender Moose Slayer Bumper... - Waterloo - 12-27-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.