Dpf can repair |
03-12-2019, (Subject: Dpf can repair ) Post: #2 | |||
| |||
RE: Dpf can repair cut out the bung, weld a plate over the hole, then weld in a new bung? next time you need to remove an exhaust clamp or xhaust sensor, heat it up with a torch until it glows nice and red all the way through it before turning the fitting. Just a suggestion. always use Anti-sieze when re-installing to prevent those kind of problems. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
Dpf can repair - eggtrucks - 03-12-2019, RE: Dpf can repair - Rawze - 03-12-2019 RE: Dpf can repair - eggtrucks - 03-12-2019, RE: Dpf can repair - Rawze - 03-12-2019, RE: Dpf can repair - Nilao - 03-12-2019, RE: Dpf can repair - snailexpress - 03-12-2019, RE: Dpf can repair - eggtrucks - 03-14-2019, RE: Dpf can repair - DVT873 - 03-16-2019, RE: Dpf can repair - Magard - 03-16-2019, RE: Dpf can repair - DVT873 - 03-16-2019, RE: Dpf can repair - DSTdriver - 03-17-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.