CM 870 ISX

[Kevroo]

Alright it’s not that I don’t want to get dirty it’s just I didn’t know what to do but I got the job done and no leaks at all in system. Got me a 4 in water line bubble and put it in exhaust of turbo and aired it up tight, used a tractor tire valve stem and put it in the intake temperature sensor hold sealed, took a 4x4 plum quick sewer line and put a 4 in floor drain plug with lots of thread tape around the threads and secured tightly with a C clamp. Aired system up didn’t hear anything aired up some more didn’t hear anything and blew the sewer Drain plug clean apart. Glad no one was standing there. So for that said no engine leaks. And as of yesterday I poped the top and checked timing just to be safe there and timing was set at 4 and 6 so good there. If i knew how I would post pics of how I got this set up for checking the whole engine for leaks. Moma wants to run insite while I’m driving this thing but my host with the computer was busy yesterday and never got it done. So my fault there. Any other ideas? Checked with what injectors was put it by pulling records and numbers matched with Cummins, did leak test on them and good, have new metering and timing actuators.