Mandate 2000 Cummins isx 600hp

[Waterloo]

(07-26-2019 )Creek Wrote:  

(07-24-2019 )Pd6cas2 Wrote:  Start using gear lube (Stalube ) right away.
Keep boost under 20 psi . I have the CM570 ,its a solid engine but needs good maintenance to keep it solid.

I have the same engine. What is the benefits of using Stalube?

Lubrication and the additive package. I use it in my 871, when we in framed it, you could smell the StaLube, it left a nice coating on the front gears and of course, the cam lobes. These new oils are being created to run with these new EPA motors, the additive package is not the same as what these motors are used to getting. The StaLube is high in Molly and other additives that promote better lubrication, I like the fact that it leaves a nice thin coating on all of the components it touches. I know it is working when I start the motor.

Does it benefit the motor, I am sure it does, the additive package alone should signify that. Now, are there any scientific white papers out there on the stuff, no. But, there are plenty of us running it here and when we tear our motors down find pretty much as new parts. I will continue using the product.

Walmart also makes a gear lube that many guys use here too, I believe it is their house brand, in a blue jug. It is less expensive than the actual brand name StaLube, and is comparable in the additive package. The Walmart gear lube is made by a reputable company as is the house brand oil Meijer's uses, if you have those stores near you.