870 flywheel housing
08-11-2019, (Subject: 870 flywheel housing ) 
Post: #13
RE: 870 flywheel housing
(08-10-2019 )tree98 Wrote:  I didn't see any

I threw the cracked housing away when I moved in the spring, so this is all I have for pics...

   

This was clearly a crack, but I couldn't find a penetration to the oil rifle. There was obviously a leak directly from the oil rifle cavity somewhere, but I could pinpoint it. The leak increased dramatically from a sweat to a leak when I shimmed my oil pump, so it was rather conclusive that was where it had to be coming from. I inspected the gasket, the housing, and the block and could not find a stain showing where the gasket was leaking. Starlight stopped by my shop when I was just finishing up, and he agreed that it didn't appear that my gasket had failed, so I'm fairly certain it leaked via the cracks.

   


   

Not all of these ^ are cracks, but it shows the poor quality of this particular casting IMHO.

   
This was a distinct crack. It was visible both front and back, straight horizontal from the bolt hole going right.


User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."
replyreply
 Thanks given by: Rawze , tree98 , Waterloo


Messages In This Thread
870 flywheel housing - tree98 - 08-05-2019,
RE: 870 flywheel housing - Hammerhead - 08-11-2019
RE: 870 flywheel housing - Unilevers - 08-12-2019,
RE: 870 flywheel housing - Unilevers - 08-12-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.